Hardware Weapon System Mil-Specs - FSC 5342

MIL-DTL-17191 - Mounts, Resilient, Portsmouth Bonded Spool Type

This specification covers the Portsmouth bonded spool type series of rubber resilient mounts, together with tests for evaluating the rubber stock and the completely assembled mount. These mounts are primarily for use on surface ships and submarines, where applicable.

MIL-DTL-18001 - Anodes, Sacrificial Zinc Alloy

This specification covers the requirements for zinc anodes (galvanic protectors) in the form of plates, slabs, discs and rods for corrosion protection (cathodic protection) of metals and alloys. It also includes features of anode design and fabrication such as cast-in cores for mounting purposes. The material described by this specification contains elements for which the Occupational Safety and Health Administration (OSHA) has set standards for exposure limits. Handling, storage, and application of this material should be in accordance with the most recent Code of Federal Regulations Title 29, Part 1910 and 1915 and any other safety and health regulations (local or otherwise) which may apply.

MIL-DTL-19379 - Mounts, Resilient, Mare Island Types 11M15, 11M25, And 10M50

This specification covers Mare Island Rubber Laboratory type resilient mounts used to support equipment on surface ships and submarines. This specification includes requirements and verification tests for the rubber compound and fully assembled mounts.

MIL-M-17508 - Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100Bb, 6E150Bb, 7E450Bb, And 6E900Bb

This specification covers Naval Ship Research and Development Center types of rubber resilient mounts together with tests for evaluating the rubber compounds and the completely assembled mounts.

MIL-M-19863 - Mount, Resilient: Type 5B5,000H

This specification covers the type 5B5,000H resilient mount assembly together with tests for evaluating the rubber stocks and the completely assembled mount.

MIL-M-21649 - Mount, Resilient, Type 5M10,000-H

This specification covers the type 5M10,000-H resilient mount assembly consisting of three elements: a compression component, a shear component, and a snubber component. Tests are provided for evaluating the rubber compounds in the components and the components themselves. This mount assembly has an assigned load capacity of 5,000 to 10,000 pounds and shall support loads only in its axial direction.

QPL-17191-37 - Mounts, Resilient; Portsmouth Bonded Spool Type (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)